Willy Wheels

Durometer Hardness for Wheels

The hardness of the urethane wheels is measured by a Durometer number. The higher the number the greater resistance to indentation under pressure or weight.

WE NOW HAVE ORANGE WITCH DR. HARD WHEELS

Basic 8 Wheel

Straight track only

A small dolly rig which you can use with your plywood to make a dolly for carrying a single camera and operator. We sell these mostly to video and documentary people who want to add production value to their projects. Can also be adapted to making really small rigs for use in interior car shots or for table top work.

• 4 angle blocks on aluminum spacer channels
• 8 Quality wheels and bearings
• Bolts and spacers for wheels
• Instructions for building dolly

Price includes two of the pictured units.

Back to Top

Handle Assembly

Push / Pull handle includes mount bracket and removable pin.

Back to Top

16-Wheel Swivel Kit

Works on straight or regular curved track. This rig allows you to use standard curved track but not the short radius 90° track. You provide the plywood to make a dolly of most any size.

• 16 Top quality wheels with bearings, bolts & spacers
• 4 Swivel and slide blocks & mount bolts & nuts
• 4 Hi tech UHMW swivel bearings
• 4 wheel mount blocks
• Instructions for dolly

Price includes four of the pictured units (16 wheels).

Back to Top

16-Wheel Swivel Set for 90° Track "Willy’s Cool Wheels"

Note: 90° track is 5 feet (150 cm) inside radius.

Similar to the "16-Wheel Swivel Kit," except that the wheel mount blocks are split so that there are two wheels on each half block which allows them to swivel separately on a short radius curve.

Note: "Willy's Cool Wheels" can also be used with our channels to mount a big dolly on short radius track.

Price includes: four of the pictured units (16 wheels). Wheel units are fully assembled and ready for mounting.

Back to Top

Doorway Dolly Track Wheels

Run your doorway dolly on straight or curved track or on your own straight track made from plastic plumbing pipe. Fits most dollies with 3/4" axles such as Matthews®. We have an axle kit for those dollies where the axle comes off with the floor wheel. Complete set includes:

• 16 wheels, 98 Durometer hardness
• 32 bearings, bolts and spacers
• 4 Angle blocks
• 4 "T" posts with 3/4" (19 mm) bore

Price includes four of the pictured units (16 wheels).

Back to Top

"Willy’s Cool Wheels" for Doorway Dolly

Somewhat similar to the Doorway Dolly Track Wheels kit, except that the wheel mount blocks are split so that there are two wheels on each half block which allows them to swivel separately on a short radius 90° track. Assembled only.

Price includes four of the pictured units (16 wheels).

Back to Top

WE NOW HAVE ORANGE WITCH DR. HARD WHEELS

32-Wheel Channel Dolly

Use for smooth dolly shots under crab type dollies such as Chapman®, Fisher®, Panther® and of course others. Place the two channel rigs on the track and place your dolly on top for a guaranteed smooth ride. 98 Durometer wheels. Fits 8" (20 cm) to 12" (30.5 cm) dolly wheels.

Price includes two of the pictured units.

Note: The assembled wheel units are NOT attached to the channels for shipping. It will take you 10 minutes to attach the wheel units to the channels.

Back to Top

Jimmy Jib® Wheels Sets

A set of 24 wheels (3 units) for the Jimmy Jib® three-leg tripod dolly for smoother tracking over track joints. Fits like their 6 wheel set, but much smoother. Assembled only.

Weight 20 lbs. (9 kg).

Also available for the new 4-corner Jimmy Jib® base. 32 wheels (4 units).

Back to Top

Pipe Track Connectors

Three sizes available for 1-¹/₂" (38.1 mm) or 2" (50.8 mm) pipe, and 40 mm waste pipe. For you who want to buy them to make your own track.

Weight 1/2 lb. (0.22 kg)

T-Wrench

T-wrench for pipe track connectors.

Back to Top