| All heads are available with Mitchell, Euro or 4-bolt type top plates. Dimensions and prices shown are with Mitchell plate (except ball head). Prices for other top plate types on request.
|
 Four-Way Leveling Head
(Camera car type) Clamps onto your bridge plate with nylon slide strips. All fittings are anodized, stainless or plated clear or black finish. Other colors on request at additional charge. Height is 6-1/2" (165 mm). Weight 20 lbs. (9.1 kg).
|
 Two-Way Leveling Head
A shorter head which levels only in two directions. However, it can be turned 90 degrees on the bridge plate to level in the other direction. Height is 4-1/2" (115 mm). Weight 16 lbs. (7.25 kg).
|
 Ball Leveling Head
Use any head with a 150 mm ball base directly on this head without any kind of adapters. Levels like a ball-top tripod. Height is 5" (127 mm). Weight 17 lbs. (7.71 kg).
|
Jib Arm Four-Way Leveling Head
Made for jib arms (like Jimmy Jib®) with a flat top and bottom that fits between a tripod and yoke. Height 6" (152 mm).
Weight 15 lbs. (6.80 kg).
|
 |
| Cat. # |
Description |
Price |
| LH-7410 |
Flat top plate with 1/2" hole and bottom plate threaded 1/2"-13 (pictured) |
$700 |
| LH-441A |
Mitchell female top plate and bottom plate threaded 1/2"-13 |
$795 |
| LH-541B |
Mitchell top plate and Mitchell bottom plate shank & nut |
$995 |
| LH-841E |
Mitchell top plate and female Euro bottom socket |
$995 |
We can adapt your Jimmy Jib® yoke to a removable Mitchell shank bottom plate so you can use it directly on a dolly or on a heavy tripod. Conversion cost includes Mitchell shank and locking nut.
Conversions are also available for Euro, Vinten and others.
Back to Top
|
 Low Four-Way Leveling Head
Only 3-1/2 inches High
Must be bolted to camera before mounting because this new head is so low you can't get your hand under to bolt it on. Then you can use it on a camera car, door or hood mount or just put it on the ground.
- Height 3 1/2" (89 mm)
- Top and Bottom plate 8" square (203 mm)
- Black Anodized
Weight 8 lbs. (3.6 kg)
Back to Top
|
 MINI Four-Way Leveling Head
Designed for smaller cameras such as 16 mm or small 35 mm. Used for car mounts or ?. Tilts 20° three ways and 45° in the other.
- 6' (152 mm) square top plate
- 8' (203 mm) square bottom plate
Height is 3 1/2" (89 mm)
Weight 7 lbs. (3.2 kg)
Back to Top
|
 Ball Mount
Often used on door mounts (hostess tray). One hand locking with plated "T" handle. Top and bottom plates are 6" x 7" square (152 x 178 mm).
Height 6" (152 mm).
Weight 7 1/2 lbs. (3.4 kg)
Back to Top
|
 45 Degree Wedge Plate
Fixed wedge plate for that extra tilt shot. 3/8" threaded bottom holes. Top and bottom are 4"x7" (222x355mm).
Weight 14 lbs. (6.35 kg)
Back to Top
|
